二、开始安装NSCA模块 下载地址 安装步骤 ./configure && make all  这样就安装完毕了，下面是客户端相关配置 cd  nsca-2.7.2 1）拷贝相关文件至nagios目录下，注意权限问题 cp sample-config/send_nsca.cfg /usr/local/nagios/etc/ cp src/send_nsca /usr/local/nagios/bin/

2） /usr/local/nagios/etc/send_nsca.cfg文件的password选项与主监控机的一致 password=xxx 3）nagios.cfg配置该配置文件中不加入send_nsca.cfg nagios_user=nagios nagios_group=nagios #上面根据实际情况更改 ocsp_command=submit_check_result use_syslog=0#这个写入message刷信息我觉得烦把他禁了 enable_notifications=0 #把分布式机器上的nagios通知功能禁用 obsess_over_services=1 #设置为obsess 4）/usr/local/nagios/etc/commands.cfg配置文件与原来监控机配置一致的基础上添加 define command{ command_name submit_check_result command_line /usr/local/nagios/libexec/submit_check_result $HOSTNAME$ '$SERVICEDESC$' $SERVICESTATE$ '$SERVICEOUTPUT$' }

5）/usr/local/nagios/libexec/submit_check_result脚本内容 #!/bin/sh

# Arguments: # $1 = host_name (Short name of host that the service is # associated with) # $2 = svc_description (Description of the service) # $3 = state_string (A string representing the status of # the given service - "OK", "WARNING", "CRITICAL" # or "UNKNOWN") # $4 = plugin_output (A text string that should be used # as the plugin output for the service checks) #

# Convert the state string to the corresponding return code return_code=-1

case "$3" in OK) return_code=0 ;; WARNING) return_code=1 ;; CRITICAL) return_code=2 ;; UNKNOWN) return_code=-1 ;; esac # pipe the service check info into the send_nsca program, which # in turn transmits the data to the nsca daemon on the central # monitoring server

/usr/bin/printf "%s\t%s\t%s\t%s\n" "$1" "$2" "$return_code" "$4" | /usr/local/nagios/bin/send_nsca  central_server -c /usr/local/nagios/etc/send_nsca.cfg

######################################### #注意脚本中的central_server为主监控机的IP ######################################### 6）若保留该词，则需更改/etc/hosts文件 xx.xx.xx.xx central_server 当客户端正常工作你可以看到进程会不断变化 [root@TJSJHL241-189 nsca-2.7.2]# ps -ef|grep nsca nagios   31772 31770  0 11:37 ?        00:00:00 /usr/local/nagios/bin/send_nsca central_server -c /usr/local/nagios/etc/send_nsca.cfg root     31774 17037  0 11:37 pts/0    00:00:00 grep nsca [root@TJSJHL241-189 nsca-2.7.2]# ps -ef|grep nsca nagios   31786 31784  0 11:37 ?        00:00:00 /usr/local/nagios/bin/send_nsca central_server -c /usr/local/nagios/etc/send_nsca.cfg root     31788 17037  0 11:37 pts/0    00:00:00 grep nsca [root@TJSJHL241-189 nsca-2.7.2]# ps -ef|grep nsca nagios   31792 31790  0 11:37 ?        00:00:00 /usr/local/nagios/bin/send_nsca central_server -c /usr/local/nagios/etc/send_nsca.cfg root     31794 17037  0 11:37 pts/0    00:00:00 grep nsca

自己也可以做个test文件测试客户端到服务端的连通性比如test文件内容为 "rrw-2-1" TestMessage 0 This is a test message. [root@TJSJHL241-189 etc]# /usr/local/nagios/bin/send_nsca central_server -c /usr/local/nagios/etc/send_nsca.cfg < test 0 data packet(s) sent to host successfully. 只要看到sent to host successfully就可以了  当时一直很苦恼为什么我的成功了但发的却是0，最后我就先不考虑这问题先去配置下了，后来发现，主监控与分布式监控的内容是一致的，嘿嘿，如有人知道的话不妨不说，在此谢过了

7）下面观察下services.cfg的配置 define service{         hostgroup_name                  rrw-game,rrw-res         service_description             CPU         check_command                   check_nrpe_cpu         contact_groups                   yunwei         check_period                    24x7         max_check_attempts              4         normal_check_interval           10         retry_check_interval            60         notifications_enabled           1         notification_options            u,c,r         check_freshness                 1           freshness_threshold             600 #此项应为实际总检测时间的2倍，监控端与被监控端设置一致，不然会出现Warning: The results of service 'http' on host 'rrw-1-2' are stale by 0d 0h 0m 16s (threshold=0d 0h 0m 20s).  I'm forcing an immediate check of the service.信息         } 这是分布式上的多出的两选项         check_freshness                 1           freshness_threshold             20#此处为正常检测间隔的2x

可以观察下nagios.cfg  check_freshness                 1  此选项黑认是为1的

分布式机器差不多了，启动nagios即可

三、主监控机配置 下载nsca模块  1）安装如上相同 make all 之后 cp sample-config/nsca.cfg /usr/local/nagios/etc/ cp src/nsca /usr/local/nagios/bin/

vi /usr/local/nagios/etc/nsca.cfg更改下面配置 nsca_user=nagios nsca_group=nagios password=xxx 此处我就不交由xinetd啥的管理了，自已直接运行 /usr/local/nagios/bin/nsca -d -c /usr/local/nagios/etc/nsca.cfg 2）rc.local添加开机自启动 /usr/local/nagios/bin/nsca -d -c /usr/local/nagios/etc/nsca.cfg 3）services添加 nsca            5667/tcp                        # NSCA 4）iptables开放5667端口 iptables -I RH-Firewall-1-INPUT -p tcp -m tcp --dport 5667 -j ACCEPT service iptables save 5）新建一个目录放置分布式机器的相关配置文件hosts.cfg hostgroups.cfg与分布式机器配置一致 services.cfg先拷贝分布式机器的配置文件，完成后的配置参考如下 define service{         hostgroup_name                  rrw-game,rrw-res         service_description             CPU         check_command                   check_nrpe_cpu         contact_groups                  yunwei         check_period                    24x7         max_check_attempts              4         normal_check_interval           10         retry_check_interval            60         notifications_enabled           1         notification_options            u,c,r         active_checks_enabled           0         check_freshness                 0#注意此处如果为1，主监控会主动刷新吧，不等分布式机器递交信息过来就会刷新设置为1时会等分布式机器递交结果过来再刷新         freshness_threshold             20         passive_checks_enabled          1 # We want only passive checking         flap_detection_enabled          0         is_volatile                     0         }

6）启动相关服务nsca nagios /usr/local/nagios/bin/nsca -d -c /usr/local/nagios/etc/nsca.cfg /usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg

四、主监控与分布式机器 主监控与分布式机器添加新监控点时两个监控机器都得同时添加

说明，参照文档时有提把下面添加到commands.cfg文件，同时在服务里调用些命令，目前我这边倒是像没有使用到，不知道运行一段时间会不会出问题，有待观察，嘿嘿，看这块有没有必要需要，具体请参照下面的文档吧 define command{ command_name check_dummy command_line $USER1$/check_dummy $ARG1$ }

 

如有新加机器，需要重启服务端的nsca

/usr/local/nagios/bin/nsca -d -c /usr/local/nagios/etc/nsca.cfg

杀掉进程，重新开启

参考文档： nsca模块里的README

 

 

本文转自holy2009 51CTO博客，原文链接:http://blog.51cto.com/holy2010/309887